About Us

About Us

In today's competitive building/development market, designing and building a unique style of home or commercial project in Denmark, Fryeburg, or Portland, ME is not enough to guarantee project success. Customers in all climates also demand a level of perfection in the comfort, efficiency and longevity of the structure once they move in. With the help of Closed-Cell Spray Foam, you can now achieve all these, simply, with one product. The Closed-Cell Spray Foam Climate Isolation System-insulation technology unequaled in today's market.

Closed-Cell Spray Foam is an insulating, spray-in-place polyurethane foam. This type of material has been used for years in thermos bottles, refrigerators, commercial freezers and coolers, but it took a company like Corbond Corporation to research and develop ways that polyurethane can be used effectively in the insulating of homes and commercial buildings.

Closed-Cell Spray Foam

provides the ultimate in insulation performance:

  1. extremely high R-value
  2. air infiltration and intrusion control.
  3. moisture control in building cavities
  4. air convection control

In other words - effective isolation of indoor and outdoor climates.

Closed-Cell Spray Foam

Closed-Cell Spray Foam insulation has the highest performance R-Factor achievable for an insulation product on today's market. The innovative product isolates the indoor and outdoor climates, stopping air movement and controlling moisture condensation and movement within walls and roof cavities helping to eliminate mold growth. Unparalleled in its proprietary formulation, it outperforms any glass fiber blanket in severe conditions, R for R in all categories of heat loss (or gain). The end result is that you build an energy efficient structure for your clients, providing them with a cost effective and simple solution to runaway heating and cooling expenses.

There are other advantages for you, the architect, builder, developer and building owner.. Because Closed-Cell Spray Foam is a self hardening spray-on insulation, it has unique characteristics in that it cannot shrink or settle and is integrally attached into the cavity. You can also have full design and construction flexibility because a 2x4 wall will provide super efficient insulation performance, which means that you are not constrained by excessive wall or roof thickness requirements. And closed spray foam cathedral ceilings/roofs require no venting.

This high performance insulation and climate isolator also enables you to build stronger structures. Because of its ability to fully adhere to the structure, forming a solid bun between studs, the building becomes extremely stiff and strong. The concept is much like completely gluing every piece of the house or building frame together. Along with the natural sealing characteristics of Closed-Cell Spray Foam comes an added benefit of noise reduction. It helps to block exterior sounds such as automobiles, wind, airplanes and any other outside disturbances, giving you a remarkably quiet building.

Closed-Cell Spray Foam

Closed-Cell Spray Foam must be installed by professionals. The two component ingredients are pumped out of a proportioner, into a hose, then sprayed into the wall cavity. It goes from a warm liquid state (when the raw materials of polyol resin and an activator are mixed at the spray gun), to an expansion phase (when the blowing agent boils and creates bubbles). Then the bubbles begin to solidify, and finally the product hardens to its solid form. This all happens within a matter of 5 to 7 seconds. The unique, trademarked lavender color of Closed-Cell Spray Foam make it easily distinguishable from all other insulation products.